Global France Germany Italy Poland Russia Spain Thailand U.K. U.S.A. Immersed electrode humidifiers are less expensive to purchase; operate on drinking water (not completely demineralised or softened); require the periodical replacement (or cleaning) of the cylinder; feature modulation suitable for comfort or industrial applications, without extreme requirements. Electric heater humidifiers humidity must be controlled precisely (museums, laboratories, cleanrooms); the quality of the water is not constant or is problematic (for example, aboard ships); periodical maintenance needs to be minimised (using demineralised water). Gas-fired steam humidifiers there are high humidification loads (heavy-duty applications) the cost of gas is lower than electricity and consequently running costs need to be kept down the user is willing to accept a higher initial investment to obtain ongoing savings over time Centralised steam distributors minimum absorption distance: the outlet of steam through continuous slits (rather than through nozzles, as in most of the competing systems) creates a thin layer of steam that flows uniformly from both sides of

the distributor, creating a large surface of contact with the air, allowing a minimum absorption distance (typically half the distance of conventional systems); minimum losses due to condensation: the distributors are coated with a layer of very high tech ceramic insulation (deriving from aerospace applications), which reduces by up to 90% the losses due to condensate and the heating of the surrounding air; no emission of droplets of condensate: the steam distributors trap and return any droplets of condensate back to the centre of the pipe, where these evaporate again. Adiabatic humidifiers for AHU/ducts and rooms very low electricity consumption: high pressure systems need less than 4 Watts per kg/h of capacity, against the 750W of steam humidifiers high capacity: the capacity can range from just a few kg/h (for example, humiSonic has a minimum capacity of 0.5 kg/h) to thousands of kg/h (humiFog) very low maintenance, in particular when supplied with demineralised water Centrifugal humidifiers Ultrasound humidifiers Very low power consumption Use of demineralised water: prevents problems due to bacteria and other contaminants.

Dual effect: humidification, due to the adiabatic effect, ensures simultaneous cooling of the air, with a consequent decrease in refrigerant compressor running time. Finely atomised water: particles with a diameter of a few microns are easily and quickly absorbed by the air. Compressed air and water atomisers the control cabinet, fitted with electronic controller; special atomising nozzles that can be installed in an AHU/duct or directly in the room being humidified/cooled; manifolds for installation in the duct; UV lamp sanitation system and protection filters. Looks like you're visiting from United States This resistive steam humidifier delivers accurate humidity control without the expense of plastic disposable boiling cylinders and simplifies maintenance with its patented scale management system.Scale that forms on the heating elements breaks off under normal operation and falls into the externally located scale collector tank. Scale removal is a simple process of draining the scale collector tank with the push of a button, allowing the unit to cool then disconnecting the tank and emptying it.

Features & benefitsClose humidity control up to +/-1%RHCan be used with RO water for low maintenace"Cold water pool" prevents water inlet and drain blockages from scaleLatest touch screen control technology Sales brochure Condair RS Resistive Steam Humidifier Get rid of scale (1.2MB) BIM models Condair BIM models Electrode boiler steam humidifierindoor portable ac unit walmart The Condair EL electrode boiler steam humidifier offers hygienic steam humidification with the convenience of servicing through quick and simple cylinder replacement.rattle in ac compressorAdvanced water conductivity management and staged electrode use enables Condair EL steam cylinders to last significantly longer than other electrode humidifiers', reducing service requirements and operating costs.ac unit throws breaker

The Condair EL incorporates the latest touch screen technology for intuitive user operation and advanced reporting. A USB port allows performance and maintenance data to be downloaded and analysed in Excel. Features & benefitsExceptionally long cylinder lifetimeTouch screen control panelBMS connectivity as standardUSB port for diagnostic reporting in ExcelStage electrode use for optimum performance throughout cylinder life Sales brochure Condair EL Electrode Steam Humidifier Quality Steam (1.5MB) BIM models Condair BIM models The Condair GS offers high capacity steam humidification with low operating costs. The economy of using gas makes this humidifier around 60% cheaper to power than an equivalent electric steam humidifier. This can provide a fast payback when replacing electric steam, especially on high capacity systems. The Condair GS is available in six different output variants, allowing continuous adjustment from 10 kg/h to a maximum of 240 kg/h. The microprocessor-controlled device interface can be operated with all commonly-used control signals.

Features & benefitsNEW High energy efficiency with optional condensing heat exchanger Large steam outputs with the economy of gas heatingCan used mains, RO or softened waterLarge flat surfaces on heat exchanger for easy scale removalWater conductivity management for reduced scale build-up and closer humidity control Sales brochure Condair GS Gas fired Steam Humidifier Sept 2016 (721.4KB) BIM models Condair BIM models Live steam humidifierThe Condair ESCO uses steam from a building’s existing steam network to provide humidification to an air handling unit (AHU) or duct. It conditions the steam to remove condensation and ensures that only dry steam is delivered for humidity control.It can operate at up to 4bar and provide up to 1,000kg/hr of humidification to an AHU. It incorporates a ceramic rotary disc valve that offers 0-100% modulation, very close control and prevents the possibility of steam leakage when closed.The Condair ESCO’s patented steam lance has tiny inner nozzles that draw steam only from the centre of the steam lance, where it is at its hottest and driest.

This ensures that any condensation that occurs around the cooler outer edges is not introduced to the duct. Features & benefitsHigh capacity up to 1,000kg/hOperates at up to 4barCeramic rotary valve 0-100% modulationPatented steam lance without the need for pre-heating and fast response for humidity Sales brochure 02 Condair ESCO (509.8KB) BIM models Condair BIM models Short evaporation steam distribution manifold The OptiSorp steam distribution manifold shortens the evaporation distance of steam released inside a duct or air handling unit (AHU). This prevents steam from coming into contact with components or corners within the AHU and ensures reliable and hygienic steam humidification.Tiny patented inner nozzles on the manifold draw steam from the centre of the steam pipe where it is at its hottest and driest. This guarantees that steam is introduced to the AHU without “spitting” that can occur when condensation forms around the cooler outer surface of the pipe. Features & benefitsPatented inner nozzles guarantee dry steam deliveryUniform steam distribution across the duct and accurate humidity controlStainless steel construction for long operational life Sales brochure Condair Optisorp EN (4MB) BIM models Condair BIM models