We are here to help you stay smart on today’s heating and cooling solutions. There are many types of specialized HVAC technology used in commercial buildings and these are often much different from those terms used in common residential applications. We thought it would be helpful to provide a summary list of the various types of commercial air conditioning systems used in the US today. Reviewing this list prior to or during conversations with your HVAC contractor might allow you to be more informed and less confused about the solutions being proposed for your commercial air conditioning needs. Variable Air Volume (VAV) – Single duct air system with varying airflow. Supply air temperature can be controlled based on heating/cooling demand or reset based on outside air temperature. VAV systems may include a terminal reheat box for better humidity and temperature control. Terminal fan powered boxes may be used for better zone control. Constant Air Volume (CAV) – Single duct air system with constant airflow.

Supply air temperature varies based on a call for heat or cooling from the thermostat. Variable Refrigerant Flow (VRF) – A heat-pump system that uses refrigerant as the heating and cooling medium. One condensing unit can serve multiple evaporators to condition the space. The heat recovery option allows the evaporators connected to the same condensing unit be in heating and cooling mode at the same time. This reduces the energy consumption required to heat and cool the spaces because less energy is wasted to the outdoors or condenser water loop. Chilled beams (active and passive) – A chilled beam is the terminal unit that conditions the space. The chilled beam includes a heating and cooling coil. Active chilled beams have air (typically ventilation air) introduced into the chilled beam to increase the capacity by increasing the induction of the unit. Passive chilled beams don’t have air introduced into the unit and heats and cools based on induction only. Chilled beam systems save fan energy because of the reduced airflow required.

Humidity and cooling water temperature must be controlled to avoid condensation. Heat Pump (water to water, water to air, air to air) – Heat pumps can heat a source of heat or cooling. Heat pumps move energy from one location to another and the refrigeration process reverses between heating and cooling modes. Air source heat pumps use the outside air as its heat source in the heating mode and its heat sink in the cooling mode.mitsubishi ceiling mounted ac units Fan Coils (FCU) and Blower Coils (BCU) – A terminal unit which is capable of providing heating and/or cooling to a zone or a space. 99 jeep wrangler ac control unitVentilation air is typically provided by a dedicated outside air system which supplies outside air directly to the room or to the return ductwork in a ducted system. trane split ac system

A fan coil unit contains an internal fan, heating coil and/or a cooling coil. Fan coil units can be noisy because the fan is within the space or close to the space. Unit Ventilators (UV) – Unit ventilators are typically exposed to the space where it is providing ventilation air and/or conditioning. Unit ventilators consist of an internal fan, and a heating and/or cooling coil. Ventilation air is typically provided by the unit ventilator and can be mixed with return air prior to conditioning the supply air. Ceiling Fans – Ceiling fans can used as a stand-alone device to improve comfort and with an HVAC system to improve the comfort in a space. Displacement Ventilation – An air distribution system that provides cool air into a space at a low level and at a low velocity. The supply air is introduced near the floor level and rises into the thermal plumes that are formed by heat sources. The benefits of this system energy efficiency and improved comfort. The system saves energy because ventilation air can be reduced per ASHRAE 62.1 because of the low supply height and high return height.

The system improves comfort because it removes contaminants associated with heat sources. Geothermal – Geothermal systems use the earths internal energy to transfer heat. Heat transfer for a geothermal system is typically completed through a ground loop, pond/lake loop or a well loop. Hybrid geothermal – A hybrid geothermal system consists of a typical geothermal well field and a heating/cooling element to offset the peak thermal load difference between the heating and cooling season. In cooling mode, typically a fluid cooler, cooling tower or heat pump is used to provide additional cooling for the system. In the heating mode, typically a boiler or heat pump is used to provide additional heating for the system. A hybrid geothermal system can lower the initial cost of the system by reducing the well field size with a minimal reduction in energy efficiency. The cost reduction and energy efficiency difference varies depending on the location, building load and amount of extra capacity that is required.

Performance is the standard of exceptional leadership. RAC Refrigeration Systems, Inc. sets the precedent in achieving world-class quality in commercial cooling with reliability, energy conservation, environmental efficiency, and renowned service. Expert commercial cooling products are a part of our industry’s finest – we build, install, and maintain durable commercial service units, with the lowest operating cost. We install, monitor, and maintain commercial cooling services for a broad range of buildings and commercial applications: One half of commercial space flooring in the United State is cooled by air conditioning systems. The single-packaged air conditioning systems, RTUs, are installed on many rooftops. The “rooftop units” are self-contained with optional installation over concrete space on the ground. Commercial scale rooftop units we install can use multiple compressors (for load matching) and an air-cooled condenser section, or an evaporatively cooled condenser (used for its greater efficiency).

Each rooftop unit we install may feature an electric heating or a natural gas component complement. When selecting newer and new high-efficiency rooftop unit models, a general rule to practice is to replace generational, defective, or broken equipment. RAC Refrigeration Systems recommends testing the rooftop unit’s life cycle to empirically test the amount of energy the high-efficiency model will save. The Federal Energy Management Program with the U.S. Department of Energy offers a free test model comparing the new RTU to the standard unit. Filtration systems produce deionized water, a major component for creating clear ice. RAC Refrigeration Systems installs refrigeration systems used to maintain ice skating rings. Cool air transports and carries less moisture than warm air reducing humidity and decreasing surrounding air temperature. The water refrigeration, ammonia, or air refrigeration system utilizes steel pipes with brine water or glycol, allowing the ice to shrink or expand between an insulated underlying surface.